Feldspar iron-removal magnetic separator

Feldspar Iron-removal Magnetic Separator


Feldspar can be divided into four categories according to composition: potassium feldspar, sodium feldspar, calcium feldspar and barium feldspar.In the industrial sodium feldspar and potassium feldspar are the most common application , these two feldspar material types after mineral processing purification or iron purification, mostly used in ceramics and other fields, the mineral processing equipment is Feldspar iron-removal magnetic separator

Feldspar iron-removal magnetic separator processing feldspar materials, its main purpose is to remove iron and miscellaneous, the impurities are mainly Fe content, in which ferric oxide and ferrotitanium is the main component of iron content impurities, after the separation and purification of its finished feldspar can meet the market requirements on the whiteness of ceramic products.

Types of Feldspar iron-removal magnetic separator

1. Dry type magnetic separator -- this type of feldspar iron-removal magnetic separator is more suitable for the operation of feldspar iron removal with coarse iron ore embedded in the cloth, and the processing does not use water;

2. Wet type magnetic separator -- this type of feldspar iron-removal magnetic separator is more useful for those ferromagnetic minerals in feldspar, which are widely dispersed in feldspar minerals with fine embedded grains, and the inclusion of magnetic minerals is formed for iron removal and purification.

Above two kinds of feldspar in addition to the ferromagnetic separator to say which is better, specific may wet magnetic separator after fine grinding of feldspar minerals except iron operation effect is more apparent, wet feldspar ferromagnetic separator used for iron removal operations, after two or three magnetic separation operation, have maintained good magnetic separation in operation conditions, the iron content in feldspar by reduced to less than 0.1.Of course, the specific choice of feldspar in addition to the type of ferromagnetic separator, but also depends on the user processing feldspar mineral distribution.

If you want to know more about our equipments details,please contact us
www.shuosencrusher.com
sarahzzdshj@gmail.com

评论

发表评论

此博客中的热门博文

Operation of Jaw Crusher

图片
Operation Instructions of Jaw Crusher 1.The preparation before starting: (1) Inspect each bearing to ensure whether it lubricates well, and whether there is enough lubricating grease on the toggle plate joints and bearing inners. (2) Check carefully whether all fasteners are totally fastened. (3) Check whether the drive belt is under good condition, and change the belt if any damages can be found. When there is grease contamination on the belt or bell wheel, it can be clean up with a clean dishcloth. (4) Check whether the protective device is under good condition, if there are any unusual events and safety hazards conditions, should correct them and report. (5) Check whether there are any ore or other impurities inside the crushing cavity. 2.The starting of the crusher (1) After inspecting the machine and transmission parts are under good condition, the machine may starts. (2) This machine can only start under empty load conditions. (3) After having started the machine, shut down the
阅读全文

22 checking items in cone crusher operation

图片
22 checking items in cone crusher operation 1, must continue the cone crusher to uniform center feeding, crowded feeding can improve work efficiency.(per shift) 2. Check whether there are copper and iron chips on the oil return filter screen.(per shift) 3. Check the oil level of lubricating oil.(per shift) 4. Check and record the pressure of lubrication system and hydraulic system, and check whether the filter element is blocked.(per shift) 5, check the wear condition of the lining.(per shift) 6. Check the status of all bolts and their fasteners.(per shift) 7, check the lubricating oil pollution.(per shift) 8. Check whether the discharge area is unobstructed and remove the accumulated materials and sundries on the rack.(per shift) 9. Grease the adjusting ring when it is not locked.(per week) 10. Check and tighten the triangle belt.(per week) 11. Check and deal with all pipelines to avoid oil leakage.(per week) 12. Check and tighten the distributor plate bolts.(per week) 13, check
阅读全文

What factors affect the output of cone crusher

图片
What factors affect the output of cone crusher There are three main factors influencing the productivity of cone crusher : the number of times of the swing of the cone;The length of the parallel crushing area;The size of the engagement Angle.These three aspects directly determine the output of cone crusher. 1.the number of times of the swing of the cone The swing times of the crushed cone is one of the key factors affecting the crusher productivity. Because of the limitation of the meshing Angle of the crushing cavity and the parallel ore discharge area, the crushed ore is discharged along the taper inclined plane mainly by gravity and vibration.When the number of spindle rotation increases, the ore is easy to be discharged, but the number of rotation is too high, which is not conducive to ore discharge, sometimes resulting in faster speed and unable to produce.Therefore, the number of swing of the broken wall has a certain constraint on the improvement of productivity. 2.The l
阅读全文