In secondary crushing station， why choose the cone crusher

In Secondary crushing， why choose the cone crusher?


The cone crusher is mainly used for the secondary crushing of stone crushing line.But why do we choose cone crusher?

The cone crusher is broken by laminating, and the mortar wall moves towards the broken wall continuously, squeezing the materials between them and crushing them.

1. Scope of application
Cone crusher is mainly used to crusher some materials with higher hardness, such as granite, basalt, tuff, river pebble, etc.

2. Size of discharge material
The final crushed material size is smaller than the impact crusher crushed.In the actual production, the ore dressing with cone crusher more, and building materials, construction projects with impact crusher more.

3. The capacity
Compared with impact crusher, cone crusher has the characteristics of low energy consumption, large output and stable production, so cone crusher is often used in large-scale and high-output production line operations.

4. High cost performance
The price of cone crusher is more expensive than impact crusher, but its wearing parts have a longer life, which avoids the trouble of changing parts frequently. In the long run, cone crusher is more cost-effective than impact crusher.

5.The cone crusher is less polluted.

As a high power, large crushing ratio, high productivity, high reliability of the hydraulic cone crushing host. The cone crushing machine of Shuosen is widely used in the fine crushing of high hardness materials, especially for the ultra-fine crushing of hard rock, ore, slag and refractory materials.At the same time, HC cone crusher equipped with advanced hydraulic setting system, hydraulic overload protection system and reset system.

If you want to know more about our equipments details,please contact us
www.shuosencrusher.com
sarahzzdshj@gmail.com
sarah@shuosencrusher.com


评论

发表评论

此博客中的热门博文

Operation of Jaw Crusher

图片
Operation Instructions of Jaw Crusher 1.The preparation before starting: (1) Inspect each bearing to ensure whether it lubricates well, and whether there is enough lubricating grease on the toggle plate joints and bearing inners. (2) Check carefully whether all fasteners are totally fastened. (3) Check whether the drive belt is under good condition, and change the belt if any damages can be found. When there is grease contamination on the belt or bell wheel, it can be clean up with a clean dishcloth. (4) Check whether the protective device is under good condition, if there are any unusual events and safety hazards conditions, should correct them and report. (5) Check whether there are any ore or other impurities inside the crushing cavity. 2.The starting of the crusher (1) After inspecting the machine and transmission parts are under good condition, the machine may starts. (2) This machine can only start under empty load conditions. (3) After having started the machine, shut down the
阅读全文

22 checking items in cone crusher operation

图片
22 checking items in cone crusher operation 1, must continue the cone crusher to uniform center feeding, crowded feeding can improve work efficiency.(per shift) 2. Check whether there are copper and iron chips on the oil return filter screen.(per shift) 3. Check the oil level of lubricating oil.(per shift) 4. Check and record the pressure of lubrication system and hydraulic system, and check whether the filter element is blocked.(per shift) 5, check the wear condition of the lining.(per shift) 6. Check the status of all bolts and their fasteners.(per shift) 7, check the lubricating oil pollution.(per shift) 8. Check whether the discharge area is unobstructed and remove the accumulated materials and sundries on the rack.(per shift) 9. Grease the adjusting ring when it is not locked.(per week) 10. Check and tighten the triangle belt.(per week) 11. Check and deal with all pipelines to avoid oil leakage.(per week) 12. Check and tighten the distributor plate bolts.(per week) 13, check
阅读全文

What factors affect the output of cone crusher

图片
What factors affect the output of cone crusher There are three main factors influencing the productivity of cone crusher : the number of times of the swing of the cone;The length of the parallel crushing area;The size of the engagement Angle.These three aspects directly determine the output of cone crusher. 1.the number of times of the swing of the cone The swing times of the crushed cone is one of the key factors affecting the crusher productivity. Because of the limitation of the meshing Angle of the crushing cavity and the parallel ore discharge area, the crushed ore is discharged along the taper inclined plane mainly by gravity and vibration.When the number of spindle rotation increases, the ore is easy to be discharged, but the number of rotation is too high, which is not conducive to ore discharge, sometimes resulting in faster speed and unable to produce.Therefore, the number of swing of the broken wall has a certain constraint on the improvement of productivity. 2.The l
阅读全文