SHUOSENCRUSHER

If the Jaw crusher discharge particle size is not up to standard, how can we adjust the jaw crusher? Jaw crusher discharge particle size is not up to standard, can adjust the jaw crusher outlet.There are three ways to adjust the outlet of the jaw crusher. 1.gasket adjustment: open the adjusting seat with the lifting bolt, check the quality of the rear thrust plate support and the rear wall of the rack, and put or remove a group of gaskets with equal thickness.By increasing or decreasing the number of gasket layers, the discharge port of the crusher decreases or increases.2. hydraulic adjustment: the rear thrust plate is used as the safety device of the crusher.The crusher adopts hydraulic safety device, which is reliable, safe and easy to discharge faults.3. support device adjustment: refers to the bearing part of the jaw crusher, generally using cast-babbitt alloy sliding bearing, it can withstand a greater impact load, and more wear resistance, but to low efficiency, the need for...

How much is a set of quarry plant, what equipment does it use? As we all know, gravel is a common material such as construction materials and highway construction materials. The plant mining gravel is called gravel yard, and the plant processing gravel is called gravel yard or stone factory. Granite is about 120~200MPa.Primary crushing usually adopts jaw crusher , which uses the extrusion and bending effect of two jaw plates on materials, crushes the crushing machinery of various hardness materials.The secondary crushing usually adopts impact crusher to produce the particle size of materials.SHUOSEN machine to recognize 300 tons per day of 300mm counterattack crusher feed particle size, discharging size and shape can be adjusted according to customer demand for multi-functional.In addition to the impact crusher, also can choose SHUOSEN machine spring crusher, cone crusher. Main factors for equipment selection can be summarized as follows: (1) the crusher is stable with continuous fee...

Operation Instructions of Jaw Crusher 1.The preparation before starting: (1) Inspect each bearing to ensure whether it lubricates well, and whether there is enough lubricating grease on the toggle plate joints and bearing inners. (2) Check carefully whether all fasteners are totally fastened. (3) Check whether the drive belt is under good condition, and change the belt if any damages can be found. When there is grease contamination on the belt or bell wheel, it can be clean up with a clean dishcloth. (4) Check whether the protective device is under good condition, if there are any unusual events and safety hazards conditions, should correct them and report. (5) Check whether there are any ore or other impurities inside the crushing cavity. 2.The starting of the crusher (1) After inspecting the machine and transmission parts are under good condition, the machine may starts. (2) This machine can only start under empty load conditions. (3) After having started the machine, shut down the...

Lubrication of Jaw Crusher In order to guarantee the regular operation and extend the use life of the machine, users should carry regular maintenance to this machine. Pay attention to the lubrication of the rubbing surface frequently, it ensures the regular operation and use life extension of the machine. The lubricating grease used for this machine should be applied according to several factors, such as the operating position of machine, the temperature and so on. Generally calcium base grease or calcium-sodium base grease is adopted. The amount of lubricating grease added into the bearing block is 50%-70% of the volume, and must be replaced once every three months. Make sure clean up with clean gas or kerosene when replacing each time. The lubrication grease muse be injected on the joint of toggle plate and toggle plate gasket before the machine starts. If you want to know more about our equipments details,please contact us Shanghai Shuosen Mining Machine Co.,Ltd www.shuosen...

1520 impact crusher is running test for 24 hours. http://www.shuosencrusher.com/…/pr…/jaw-crusher-shuosen.html sarah@shuosencrusher.com whatsapp:008613598023510

Hydraulic Cone Crusher for Iron Ore Crushing Iron ore is a relatively hard metal ore which easy to wear on the machine. Therefore, it must be select special mining crushers for metal ore. For the crushing of iron ore, it is mainly primary crushing and second crushing. Primary crushing and coarse crushing: usually adopt jaw crusher, which has simple structure, large crushing ratio, strong crushing capacity, convenient maintenance and low operating cost. It can be used to crush large iron ore to medium-sized granularity. Jaw crusher is very suitable for primary crushing operations. Second crushing: For the iron ore with high hardness, Hydraulic Cone Crusher is the most suitable medium and fine crushing equipment. It can achieve "more crusher and less energy". Generally, the second crushing of iron ore has two sections, one section is mainly medium-sized granularity crushing, and you can be select a standard cone crusher. The feed size is above 20mm; another is fine crushing,...

jaw crusher PE900*1200 http://www.shuosencrusher.com/en/product/jaw-crusher-shuosen.html If you want to know more about our equipments details,please contact us Shanghai Shuosen Mining Machine Co.,Ltd www.shuosencrusher.com sarahzzdshj@gmail.com sarah@shuosencrusher.com